Printmaking process
Relief process
In an relief printing, artist would cut out the areas off a surface of the parts they don't need. artist use etching and sketching techniques to convey their art. They would then transfer their piece using a barren.
Steps
1. Images drawn onto surface with pencil
3. Ink is applied to the surface
- Use barren (light pressure)
5. Let dry and, then you are done! :)
Intaglio Process
In intaglio printmaking the artist incises into a surface of a plate with tools or acid. Then that plate would be coated with ink. then you would wipe that plate so the ink would only remain only in the incised areas.
Steps.
2. remove ink from plate
3. place plate in hot surface
4. let it soak
5. remove excess water
6. Transfer ink plate to press
7. Move the press with some pressure
8. Carefully remove the paper, then you're done!
5. remove excess water
6. Transfer ink plate to press
7. Move the press with some pressure
8. Carefully remove the paper, then you're done!
Lithography
Lithography is based on the factors that oil and water do not mix. Areas with moisture repel the oil leaving out the negative space. The inked areas would be transferred to paper with a press.
Steps
2. Apply Arabic gum to chemically separate the image from the non image area.
3. Roll image on press.
4. Let dry then your'e complete.